nova s 520 Thicknessing planer - Tersa
(Taxes not included)
Sturdy structure with precision when moving the work table
The 4 screws with a large diameter combined with the 2 side linear guides ensure worktable stability eliminating the necessity of locking in position. The integrated protections guarantee high precision and reliability over time.
The nova s 520 thicknessing planer has several features, one of the most important is the worktable stability, ensured by 4 screws with a large diameter combined with the 2 side linear guides. Another great feature is the rollers interchangeability. Perfect finishing obtained by quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements, such as a minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.
*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs.
- Perfect surfaces and high feeding performance thanks to the planer unit with a rubber outfeed roller
- Powered worktable lifting with micrometric adjustment for the maximum convenience and precision
- Tersa monoblock cutterblock: the cutterblock is made from a single block of steel ensuring complete stability even under heavy dynamic loads
- The sectioned steel infeed roller allows the simultaneous processing of different workpieces thicknesses giving great results even with minimum removal
- The thicknessing table with idle rollers is very helpful with the feeding of moist and/or resinous wood. It is particularly suitable for heavy duty woodworking operations and with rough work-pieces
*Does not include power cable
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- Worktable with 2 idle rollers
- 1st infeed sectioned steel feed roller
- "TERSA" type cutter block with throwaway knives
| TECHNICAL FEATURES | ||
Working width | [mm] in | 520 (20.5”) |
| Worktable dimension | [mm] in | 530 x 900 (20.87 x 35.44”) |
| Working height (min/max) | 3,5/300 (0.12 x 11.81”) | |
| Max. stock removal | [mm] in | 8 (0.31”) |
| Minimum working length | [mm] in | 220 (8.69”) |
| Minimum working width | [mm] in | 10 (0.37”) |
| Cutterblock speed | [rpm] | 4500 |
| Cuterblock diameter | [mm] in | 120 (4.75”) |
| No. 4 knives | 35x3x520 (1.37”x0.12”x20.5”) | |
| Feed speed | [m/min] | 5-8-12-18 |
| Other technical features: | ||
| Three-phase motor | 8kW (11hp) 60Hz | |
| Exhaust outlets diameter | 150 (5.87”) | |
| MINIMUM INSTALLATION REQUIREMENTS | ||
| power absorption | [A] | 25 |
| voltage frequency | 600V 60Hz |