class ti 145ep Moulder

Prezzo scontato a partire da {0}
(Escluso IVA, spese di spedizione e installazione)
The best solution for every application.
Precision and reliability with the technological devices that guarantee reduced machine set up times, greater safety and ease-of use.
Console eye-S main functions:
- connectivity among machines belonging to the same company network and 4.0 Industry preset
- sharing of work programs and tools database
- activity monitoring and reporting on the use of the machine
- self-diagnosis, tele-service and link to troubleshooting

"FAST" sectional worktable: the best support for the workpiece. Provides support for the work piece being machined as it is close to the tool, allowing the adjustment with mounted tools.

"FLEX-ONE" fence: easy set up. A single simple movement to retract and re-position accurately the fence on the worktable. No more test runs thanks to the automatic fence positioning with digital work depth indicator.

"T-SET" rapid tool locking system: maximum degree of safety without any efforts. No more keys for machine tooling with the new device that ensures the fast locking/unlocking of tools simply through a gun with compressed air.

eye-S console. The new control panel, with its attractive design, allows easy and intuitive machine programming, combining the 10” colour touch-screen display and the Maestro active user interface.
STANDARD EQUIPMENT
- Powered operating unit movements with digital readouts
- Spindle fence with mechanical adjustment by handwheels, accessible from the front of the machine
- adjustment of entire fence in respect of the tool Ø
- adjustment of entry fence for thick removal
- mechanical readout for the adjustment
- 5 spindle speed: 3000 / 4500 / 6000 / 7000 / 10000 rpm
- Reverse spindle rotation (with electrical interlocking for reverse operation)
- MK5 interchangeable spindle with presetting for the “T-SET” rapid tool locking
- Direct motor start
- "FAST" section table, with manual external adjustmenT
Replace the table rings and optimize the workpiece support
TOOLING INCLUDED
- 1 1 ¼” spindle
- Toolbox: Wrenches, allen wrenches, user manual, spare parts catalog
SAFETY/PROTECTIONS
- Emergency pushbutton
- Safety microswitch on motor access door
- Overload switch protection
- Mechanical brake on main motor
- "CSA" rated electrical components, including cables
- Main power switch can be locked in the off position with a padlock
- Auxiliary low voltage circuit (110 volt)
MACHINE CONGIFURATION
- 10.19.49 USA/CAN safety regulations version
- 10.19.49 USA/CAN safety regulations version
- RT.08.59 class ti 145ep Usa/Canada version
- 93.07.34 220 volt
- 93.15.01 Frequency 60 hz
- 24.01.54 Aluminium fence instead of wooden fence with connecting bars between the two tables
- 13.13.05 Spindle moulder shaft of 1 1/4"
- 21.13.11 Locking by countersunk socket screw
- 21.13.14 Locking without slot
- 08.97.10 Seaworthy packing
- 10.99.91 Machine language: ENGLISH
*Does not include power cable
TECHNICAL SPECIFICATIONS | |
Worktable dimensions | 1200 x 780 mm (47.19” x 30.69”) |
Spindle tilting | ± 45.50° |
Working length of spindle diam. 1” 1/4 | 180 mm (7”) |
Spindle base projection from table with interch. spindle | 62 mm (2.44”) |
Max tool diam. retractable under worktable | 300 x 43 mm (11.75” x 1.69”) |
Exhaust outlets diameter: spindle hood machine base |
120 mm (4.69”) 100 mm (3.94”) |
Installation requirements | |
Nominal extraction air consumption | 1380 m3/h (800 CFM) |
Air exhaust speed | 20 m/s (66 ft/s) |
Motor power | 11 HP – 8 kW |
Electrical requirements ***subject to change; must be verified prior to installation*** | 220 V – 60 Hz – three phase – tbd amp |