profiset 60ep Automatic planer and thoroughfeed moulder
$80,836.84
(Price does not include taxes, shipping and installation)
The profiset 60ep is an 5 spindles Automatic planer and throughfeed moulder with possibility to preset the profiling on the top horizontal spindle. The SCM solution "Set-up" allows a simple and rapid set up when changing tools as it has the minimum tool diameter as only reference. It is enough a single adjustment to position all elements (tool, working height, front and rear pressers, feeding rollers) with no idle retooling times . For an absolute ergonomics and safety, all controls for the working units set-up are situated on the machine front side and have mechanical readouts with decimal precision of the working section.
*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs.
Available 2
Item ready for delivery
PROFISET 60EP INSTALLATION
With the Easy Plus electronic control it is possible to easily and comfortably set and monitor the machine through the 7” LCD colour display at 16:9 resolution. Some of its features:
• automatic control of left vertical spindle and upper horizontal spindle positioning
• feed speed selection
• tools database with visualisation of tools picture
• programs database with visualisation of tools picture and position
For an absolute ergonomics and safety, all controls for the working units set-up are situated on the machine front side and have mechanical readouts with decimal precision of the working section
The SCM solution "Set-up" allows a simple and rapid set up when changing tools as it has the minimum tool diameter as only reference. It is enough a single adjustment to position all elements (tool, working height, front and rear pressers, feeding rollers) with no idle retooling times
Productivity and improved finishing are granted by the optimum machine’s feeding thanks to:
• gears box drive and cardan joints technology
• pneumatic working pressure on the feed rollers
• inverter for the stepless speed adjustment from 5 to 25 m/min
The use of the reference engraver on the first lower spindle ensures an optimal reference guide for the workpiece to be machined allowing to obtain a perfect straightening
- The idle roller placed on the outfeed table, typical feature of industrial level machines, guarantees a very effective feeding and the best finishing
- The infeed table and the infeed right guide have a transversal adjustment by means of a parallelogram system which ensures an absolute precision
- The manual pump for the worktable lubrication positioned in the operator area facilitates its use, assuring always the best smooth movement of the workpiece
- The vertical spindles allow a profiling capacity of up to 40 mm and have an axial adjustment of 40 mm to manage more profiles
- For the maximum versatility, the machine is equipped with a kit to enable the profiling of the top horizontal spindle that includes also two mechanical readouts with decimal precision
- The 2500 mm infeed worktable allows to machine very long workpieces
- The machine comes with the ease-to-use tool diameter measurement device “Preset 25” which has a centesimal accuracy
- The safety integral cabin ensures low emission of noise and dust guaranteeing a full view of the machine at the same time.
*Do not include power cable
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- 220 volt version
- Automatic star-delta start for motors
- Increased motor powers: - comp. 5
- Brake for 4 motors - composition 5
- Kit for enabling profiling with the top spindle
- Second flanged feed roller opposite left vertical spindle
- Feed unit - Composition 5
- Vertical pressure with idle roller placed in front of right spindle
- 2500mm infeed worktable
- Kit for min. working width from 25 to 15 mm
- PRESET 25: tool diameter measurement device
TECHNICAL FEATURES |
| |
Minimum working width (finished section) | mm | 15 |
Maximum working width (finished section) | mm | 230 |
Minimum working height (finished section) | mm | 10 |
Maximum working height (finished section) | mm | 120 |
Minimum length of single component - comp.5 | mm | 420 |
Variable feed speed with inverter | m/min | 5 ÷ 25 |
Feed motor power | 3 kW (4 Hp) | |
Planer spindle motor power | 5,5 kW (7,5 Hp) | |
Vertical spindles motor power (single) | 11 kW (15 Hp) | |
Top horizontal spindle motor power | 7,5 kW (10 Hp) | |
Bottom horizontal spindle motor power-Comp.5 | 5,5 kW (7,5 Hp) | |
Spindles speed | rpm | 6.000 |
Spindles diameter | mm | 40 |
Vertical spindles length | mm | 140 |
Horizontal spindles length | mm | 250 |
Axial adjustment of vertical spindles with respect to the worktable | mm | 40 |
Axial adjustment of horizontal spindles with respect to the right fence | mm | 40 |
Min./max. tool diameter on surface planer | mm | 120 – 140 |
Min./max. tool diameter on vertical spindles | mm | 100 – 180 |
Max. profiling capacity on vertical spindles | mm | 40 |
Min./max. tool diameter on top horizontal spindle | mm | 100 - 180 |
Min./max. tool diameter on 2nd bottom horizontal spindles | mm | 100 – 180 |
Profiling capacity with tool 180 mm on 2nd bottom horizontal spindles | mm | 15 |
Feed rollers diameter | mm | 140 |
Infeed table length | mm | 2.500 |
Rapid adjustment of infeed table and fence | mm | 10 |
USA version Voltage-Frequency |
| 230V-60Hz |