k 100 evo Automatic single-sided edge bander

- Top machining units fixed to the presser to allow the automatic positioning according to the panel thickness

· Bottom machining units fixed to the machine base, under the belt, for an accurate panel reference

· Safety enclosure on the entire machine length with polycarbonate windows for the machining unit view during the processing

· Electrical cabinet with door inside the machine base enabling an easy access in case of any maintenance operations

· Panel support rollers positioned parallel to the belt; it can be extended on the entire machine length

· Kit for glue pot rapid replacement that includes the rapid unlocking device and the double thermoregulation system for managing two different working temperatures (i.e. for polyurethane glues use)

· Pre-milling unit with diamond tools; it performs the panel edge obtaining an optimal surface for the glue application and a perfect jointing line with the edge

· Glue pot unit for the automatic gluing with hot melt glue of edges in rolls and strips on straight panels

· Single-motor end cutting unit that carries out the cutting of front and rear exceeding edge

· Trimming unit for the trimming of top and bottom exceeding edge; it includes 2 high frequency motors, rotating copiers, unit manual exclusion and combi cutters (R=2) to machine different edge types.

· Edge scraping unit fitted with numerical readout for the positioning and with rotating copiers; it eliminates the presence of notches left from the tools on the plastic edges during the trimming

· Glue scraping unit with rotating copier that eliminates any glue excess in the joint between panel and edge, improving the panel cleaning

· Brushing unit with 2 independent motors for the cleaning/polishing of the edge