Skip to content Skip to navigation menu

me 20 Automatic edge bander with glue pot


(Shipping and installation* included, taxes not included)
*Applicable only for models that require SCM installation

One of our most popular machines, the Minimax ME 20 has a new look and new features that make it better than it’s ever been! Stable and steady the Minimax ME 20 platform is a stainless steel mono-block base. The upper protection hood is designed specifically to allow for easier access to the operating units. Panels feed with high precision along the friction-free worktable. Rollers facilitate panel processing and the patented feed belt moves the panels through effortlessly and smoothly. All stations are adjusted with a digital mechanical readout for reference, and panel processing is fully automatic with all operating units synchronized.

*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs. 

Available 1

Item ready for delivery

For this model the SCM installation is required.

End cutting unit for the cut at 90° on the leading and trailing edges of the panel. Possibility to exclude the unit from the control panel.

Gluing unit equipped with an innovative system of self-lubrication of the glue pot which allows a more extensive use of the machine without necessity of lubrication.

Superposed trimming unit  equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting point.

Absolute precision offered by the end-cutting unit, with a cutter and an independent asynchronous motor

Error-free machining is ensured by the simple and intuitive control panel positioned on the front of the machine, that allows an easy selection of all the main functions, among them, the operating units switching on and off. The PLC guides the operator during maintenance, cleaning, diagnostic operations, etc.

The very best finishing of the panel edge is also guaranteed by the panel conveying track (exclusive solution), which prevents the panel having the feed affected by the typical pulses generated by the pinion of a traditional feed track and ensures a smooth and linear panel movement

  • Steel single-block machine frame, to guarantee an excellent support
    for the operating units
  • friction-free worktable with n.3 rollers
  • panel feed by means of a top feeder with high-adherence toothed belt with steel cables inside
  • manual feeder lifting with positioning of all operating units synchronised with the feeder and based on the panel height
  • numeric readout of the selected panel
  • telescopic front support with rollers for all the machine length
  • anodized aluminium outfeed fence

*Do not include power cable

(Options and accessories included with this machine)

  • Single-phase version 60 Hz
Worktable dimensionsmm
1950 x 180
(76.75” x 7.06”)
Worktable heightmm
Thickness of rolled edgesmm
0,4 ÷ 2
(0.19” ÷ 0.06”)
Max. thickness of edges in stripsmm (in)5 (0.19” )
Min. ÷ max. working heightmm (in)12 ÷ 50 (0.5” ÷ 0.5”)
Min. panel length/width with rolled edgesmm
(7.09” / 2.56”)
Min. panel length (frontal end cutting only)mm (in)120 (4.75”)
Coil holder platemm (in)730 (28.75”)
Feed motor power kW0,25
Feed speedm/min6
Pneumatic operating pressureBar (PSI)6,5 (95)
Operating temperature°C (°F)190 (374)
Exhaust outlet diameter (base)mm (in)120 (4.75”)
Exhaust outlet diameter (glue pot)mm (2.56)60 (2.37”)
Gluing unit:  
Motor power kW0,18
Glue capacityKg (Lbs)~ 0,8 (1.76)
Trimming unit:  
Motor power kW0,55
Widia cutters Ø 75 mm Z4
Cutters rotation speedrpm12.000


Exhaust air consumptionm³/h (CFM)1017 (600)
Rated currentA11
Single-phase version  
USA version - Voltages / Frequency 230V/60Hz