formula s 940p band saw
$15,679.00
(Price does not include taxes, shipping and installation)
The s 940p formula band saw is equipped with a cast iron work table as well very thick cast iron wheels running on sealed for life ball bearings
This has a positive effect on the stability, precision and therefore reliability of the machine.
The top and bottom high precision blade guides ensure a perfect result when carrying out the straight and tilted cuts on wooden, plastic or aluminum materials
The dimensions of this machine are larger than the previous model (formula s 840p), this allows machining on larger materials.
Item currently not available
Safety first
Total safety machining with telescopic protections with rackwork to the blade.
Finish quality
A perfect cut result is assured by the top and bottom high precision blade guides.
Practical machines suitable also to perform straight and tilted cuts on wood, plastic and aluminum.
Solidity and sturdiness
The large dimensioned cast iron saw wheels, as well as the worktable, running on sealed for life ball bearings.
-
Cast-iron squaring fence for maximum stability and cutting repeatability
-
Rack and pinion lifting system of the guide unit for a fast and safe setup
-
Saw blade tensioning indicator that guarantees immediate and continuous control of the value
-
Cast-iron work table with lapped surface for maximum smoothness of the piece
-
Full disc cast iron wheels to keep the blade speed constant during machining
-
Top and bottom blade guide with ball bearings to minimize lateral movements of the blade and therefore increase the precision of the cut
-
Cleaning brush on bottom wheel to reduce the wheel wear
|
| Dati tecnici |
| S 940P | ||
|
| worktable dimensions | [mm] | 800 x 1250 | ||
|
| cast iron saw wheels diam. | [mm] | 940 | ||
|
| saw wheels width | [mm] | 54 | ||
|
| max. cutting height (inches) | [mm] | 560 (22”) | ||
|
| max. cutting width | [mm] | 910 | ||
|
| worktable tilting |
| 0° ÷ 45° | ||
|
| min./max. blade dimensions | [mm] | 12/50 | ||
|
| - three-phase motor |
| 6,7kW (9hp) | ||
|
| exhaust outlet diameter | [mm] | N° 2 x 140 | ||
| Installation requirement |
| ||||
| Extraction air consumption | [m3/h] | 2220 | |||
| Exhaust air speed (dry shavings) | [m/s] | 20 (0.81”) | |||
| Installed motor power | [VA] | 7500 | |||
| Voltage | [V] | 220 | |||
| Frequency | [Hz] | 60 | |||
