minimax si x Circular saw with ±46° double tilting blade
C$40,300.00
(Shipping included, taxes not included)
Finally available at everybody's reach. With powered and programmed sawblade movement available as standard.
It allows simultaneous use of a 400mm saw blade and 160mm scoring blade both for 90° cutting and ±46° tilted cutting, guaranteeing the maximum cutting height on veneered panels and solid wood.
*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs.
Available 1
Item ready for delivery
SI X INSTALLATION
Double tilting at everybody's reach. New saw unit with a stiff cast-iron structure which can accommodate a blade of 400 mm diameter with scoring blade mounted. It ensure a perfect and easy cutting of veneer panels and thick solid wood material with very high thickness both at 90° and tilted cuts at ±46
READY: the practical advantage for automatic control of the main positions. The programming of the work becomes simple and effective with the electronic control with a 4” LCD colour screen.
Panel loading is easy on the large squaring frame with an idle roller at the end. The telescopic squaring fence with the inclined metric scale and two reversible stops can be used to square panels measuring 3200 x 3200 mm and for tilted cuts at up to 45° on both sides of the frame
SCM Thundercut App for mobile devices: optimizer/sequencer even for not skilled workers
- The lifting of the blade unit is done by 2 ground cylindric bars, for the maximum rigidity and smoothness
- The saw blade uses 100% of the motor power, thanks to the scoring blade with an independent motor
- The scoring blade is adjustable from the outside without tools and allows fast and accurate positioning with no play
- The sliding table ensures a top quality precision with a smooth and silent action, a self-cleaning dustproof system, and a long lasting accuracy with no adjustments required
- The possibility to start or stop the blades motors from the pushbuttons located at the ends of the carriage considerably helps when machining large dimensioned panels
- The sliding table is provided with an additional table for the support of panels with large dimensions
- The angular cutting device with flip-over stops allows to rapidly perform mitre cuts without moving the squaring fence and it is very useful for small work pieces
- The round cross-section sliding bar for the parallel fence with micrometric adjustments ensures a smooth, fast and especially accurate positioning of the fence
- The telescopic system for the two positions of the overhead blade protection is very fast and comfortable whenever switching from 90° cuts to tilted ±46° cuts is needed, resulting in a totally safe machining
*Do not include power cable
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- Version with maximum squaring stroke 3200 mm
- Angular cutting device with flip-over stops
- Squaring fence with no. 2 LCD readouts for stops position
- Third squaring stop with LCD display for the position readout
- "READY 3 UP" version
- Additional table on the sliding table
- Crate
| TECHNICAL FEATURES | ||
| Blades tilting | [mm] | -46° ÷ +46° |
| Max. saw blade diameter with scoring blade installed | [mm] | 400 (15.75”) |
| Max saw blade projection from table at 90°/+45°/-45° | [mm] | 136/97/60 (5.5”/3.81”) |
| Scoring blade diameter | [mm] | 160 (4.75”) |
| Squaring stroke | [mm] | 3200 (125.94”) |
| Cutting width on parallel fence | [mm] | 1270 (49.94”) |
| Other technical features: | ||
| Three-phase motor | 8kW (11hp) 60Hz | |
| Exhaust outlets diameter | [mm] | 120 (4.75”) |
| MINIMUM INSTALLATION REQUIREMENTS | ||
| Section of electrical cable | [mm2] | 10 |
| Power absorption | [A] | 31 |
| Voltage - frequency | 600V - 60Hz |
