me 22 Automatic edge bander

GENERAL FEATURES

· control panel on machine infeed side

· machine frame made of high rigidity ribbed steel to guarantee an excellent support for the operating units

· top thick steel pressure beam with rubber coated wheels

· exclusive feed truck

· manual adjustment of top beam with automatic positioning of the operating units according to the selected panel thickness

· numeric indicator of the selected panel thickness

· glue smokes specific exhaust outlet; centralized extraction of the other dusts

· panel support roller which can be extended on the entire length of the machine

· safety enclosure

· electrical cabinet with PLC, padlockable main switch and overload protection

· emergency push buttons

GLUE POT UNIT, EDGE LOADING AND PRESSING SYSTEM

Complete with:

· hot melt glue with quick heat up system and internally teflon coated to allow an easy glue replacement

· glue application on the panel by means of glue spreading roller

· temperature adjustment of the applied glue integrated in the PLC control

· device for automatic recovery of unused glue

· automatic edge loading system for rolled edges with shear device for 2 mm max. thickness edges

· coil holder plate, 730 mm diameter

· pressing unit with n. 2 edge pressure rollers: one in steel and the second rubber coated

· adjustable infeed fence with numeric readout

· automatic lowering of the glue pot temperature after a temporary non-use of the machine

END CUTTING UNIT: end cutting unit for the cut at 90° on the leading and trailing edges of the panel. Possibility to exclude the unit through PLC.

SUPERPOSED TRIMMING UNIT

Equipped with vertical copying pads for an accurate positioning of tools with reference to the cutting point.

The unit is provided with 72 mm diameter, combined cutters: the radius part of the cutter is used to trim 2 mm radius edges and chamfered thin edges. The straight part of the cutter is used for the trimming of edges in wood up to 5 mm. Changing from radius edge to edge in wood is done easily moving the cutters axially. The edge thickness is shown by 2 numeric readouts.

EDGE SCRAPING UNIT

For the finishing of 2 mm PVC/ABS edges.

It assures an excellent vibration free finish thanks to its high rigidity structure.

High working precision thanks to the horizontal and vertical copying pads (with chrome plated surfaces), which assure an accurate positioning of the knives in relation to the cutting point.

Pair of R=2 mm knives included.

Manual exclusion of the unit.

GLUE SCRAPING UNIT It eliminates any excess of glue in the joint between panel and edge, improving the panel cleaning.