e 20 manual edge bander for straight and shaped panels
$10,865.00
(Price does not include taxes, shipping and installation)
The e 20 is the manual edge bander designed to be economic, reliable and practical; a complete machine for the edge banding of straight and shaped panels. Equipped with a glue pot, it can edge band PVC, ABS, wood laminate etc. and not pre-glued edges.
Ideal solution for small and medium series jobs.
Increased productivity and ease of use with the new 4,3” touch-screen
easy adjustment of height, edge thickness and panel.
Edge feeding and motorized pressure roller with electronic speed adjustment, to create an edge banding at the most suitable speed.
Electronic temperature adjustment and precise glue dosage control.
Glue tank and sliding base of the edge coated in Teflon for simple cleaning and quick maintenance.
*Photos may include optional equipment. Please verify availability and compatibility under Product Details and Specs.
** Adjustable tilting table and Infeed fence not included. Can be purchased separately. For details contact us at Add Support Ticket | SCM Shop USA (scmgroup.com)
4,3” touch screen with advanced functions complete with:
* Adjustment of the edge feed speed from 3 to 8 m/min
* Management of manual work modes, programmed cutting and measure of the panel perimeter
* Automatic calculation of the required edge length with reference to the most common geometries
Teflon-coated hot melt glue pot installed underneath the worktable to ensure a continuous glue recirculation and avoid its overheating. Powerful heating system for an immediate use with timed stand-by
- High rigidity and stability steel monoblock base
- Anti-scratch phenolic multilayer work table with modular holes complete with supports for the panels support to guarantee no risk of damaging the moving panels
- Front extension for the support of large dimensions panels
- Shear device for rolled edges complete with 780 mm (30.69”) coil-holder plate
- Glue application of edging material by means of a powered glue spreading roller
- 3-roller outfeed fence for a better gluing quality on large dimensioned straight
- Wheels for an easy machine movement
- Emergency pushbutton located on the front machine side, padlockable main switch, Stabilised power supply for auxiliary circuit 24V in direct current.
*Do not include power cable
** Adjustable tilting table and Infeed fence not included. Can be purchased separately. For details contact us at Add Support Ticket | SCM Shop USA (scmgroup.com)
MACHINE CONFIGURATION
(Options and accessories included with this machine)
- 780 mm coil-holder plate
- 3-roller outfeed fence
- Front extension for the support of large dimensions panels
- Wheels to allow machine movement
| TECHNICAL FEATURES | ||
Thickness of pre-cut edges in strips | mm (in) | 0,4 – 3(0.19” - 0.12”) |
| Thickness of edges with shear device: | ||
| (80 mm height) | mm (in) | 0,4 – 1,5 (1/64” – 1/16”) |
| (50 mm height) | mm (in) | 0,4 - 2,5 (1/64” – 3/32”) |
| (45 mm height) | mm (in) | 0,4 – 3 (1/64” – 1/8”) |
| Edges height | mm (in) | 10 – 84 (0.39” – 3.31”) |
| Panels thickness | mm (in) | 8 – 80 (0.31” - 3.12”) |
| Minimum panel width | mm (in) | 50 (1.94”) |
| Minimum panel length to be applied | mm (in) | 290 (11 13/32”) |
| Minimum internal radius with 0,4 mm edge thickness (concave profile) | mm (in) | 25 (0.94”) |
| Minimum external radius with 0,4 mm edge thickness (convex profile) | mm (in) | 5 (0.19”) |
| Feed speeds | m/min (ft/min) | 3-4-5-6-7-8 (10-13-16-20-23-26) |
| MINIMUM INSTALLATION REQUIREMENTS | ||
| Average compressed air consumption | l/min | 10 (0.37”) |
| Installed motor power | kW | 6,9 |
| Operating temperature | °C (°F) | 140 -220 ( 284 -428) |
| USA Version – Voltage /Frequency | 230V / 60Hz |
